Evolis Primacy: Evolis Elypso

Modified on Fri, 19 Apr at 9:14 AM

If Evolis Print Center is displaying the Printer Name as "Evolis Elypso" the printer's mainboard can be the issue. 


Power Cycle Printer


1. Unplug the printer's power cable from the outlet


The printer's power should be completely off.


2. Open the printer's top cover




3. Remove the printer's ribbon




4. Locate the grey tab on the printer's left side > Pull the grey tab



The printer's left side panel should open.



5. Gently unplug the beige horizontal shape multi-pin connector from the printer's mainboard



6. Gently plug the horizontal shape multi-pin connector back to the printer's motherboard


7. Plug the printer's power cable to the outlet


8. Open Evolis Print Center 


You should no longer see the printer's name as Evolis Elypso.


Click here to submit a ticket, if you still see the printer's name as Evolis Elypso.



Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article