Evolis Altess: Card Feed Problem

Modified on Fri, 12 Jul at 9:46 AM

Adjust the Card Gauge


We recommend adjusting the gauge between 30-35 mil to prevent card jams.


1. Open the top cover of the printer 


 

2. Slide the card gauge to set between 30-35 mil



 



Card Handling


1. Move the cards back and forth to allow the cards to separate from another to make sure none are sticking to one another


Moving cards back and forth helps discharge any static charge that may have built up around the cards.


2. Reinsert them back into the printer


Avoid touching the front and back of the cards while reinserting to prevent any contaminates on the card.


 


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article