Evolis Altess: Dispose Printer

Modified on Fri, 3 May at 9:12 AM

Clients with managed service accounts are required to return the printer's printhead to our warehouse. Clients will be provided with a prepaid shipping label to return. 


Remove Printhead

Video changing the printer's print head. Follow the first 20 seconds of the video for printhead removal



1. Unplug the power from the printer


2. Open the top cover of the printer


3. Push down on the clip below the printhead to release the printhead 


This can be done by pressing against the back metal spring loaded plate with one hand twisting the print head out with the other. 

The print head should release easily and require little or no force.


4. Gently pull the connector out of the printer's socket

 

The wires to remove is the one going into the print head. 

Pinch the wire with your fingers and pull.



Package Printhead


1. Place the printhead in the bottom corner of the padded package


2. Apply the package's adhesive



3. Fold both ends of the package towards each other



4. Fold one end of the package over the other end


5. Fold the package in half




6. Securely tape the package



7. Place the secure package into a box > Apply the shipping label on the box


Dispose the printer once the printhead has been securely packaged and shipped to our warehouse


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article